|
RESEARCH
· Working in the fields of structural concrete, FRP reinforcement, repair, and construction innovation. · Research grants, awards and industrial contracts in excess of US$600,000 · Invited to make presentations and sit on committees nationally. · Published (or in print) over 150 books, papers or reports, of which over 100 in refereed journals and conferences. · Supervising 15 (4 as main supervisor) post-graduates research students registered for higher degrees. PROFESSIONAL AND OTHER ACTIVITIES
· Registered Engineer in · Professional Experience in Construction Supervision and Site Management. · Member of two international committees on Bond in Concrete and FRP reinforcement [5.1] · Coordinator of the International Round Robin Tests on FRP Reinforcement with 19 partners [5.8.3] · Member of · Organiser of seven International Seminars in · Chaired sessions of external seminars and conferences. Presented papers in Learned Safety Society meetings. · Attended and presented papers in numerous national and couple of international conferences. ADMINISTRATION
· 1995 (http://www.shef.ac.uk/uni/academic/A-C/ccc/). With over 60 members, the CCC is the largest Centre of its kind in the · Committee on University Publicity · Committee of University Environment TEACHING
· Teaching and tutoring experience since 1988 · Lecturing on structural engineering topics including structural analysis, construction safety, safe concrete work as well as on specialised topics such as scaffolding analysis by computer, both at UG and PG levels 1 PERSONAL DETAILS SURNAME: SON FORENAMES: Ki Sang DATE OF BIRTH: 01.06.1951 Age: 51 NATIONAL SERVICE: Compulsory UNIVERSITY EDUCATION: UNDERGRADUATE STUDIES: 1981-1984 - Civil engineering at POST-GRADUATE STUDIES: 1980-1988 – Concrete Engineering at Engineering College/prof . Sang Sik KIM QUALIFICATIONS AND AWARDS: PhD, DIC - Thesis "Nonlinear Behaviour of Reinforced Beam and Column Connection Subject to Seismic Load PE(Professional Engineers)on Construction Safety Management MEMBERSHIP OF LEARNED SOCIETIES AND PROFESSIONAL BODIES: 1993: Registered Engineer in 1994: Member of American Society of Safety Engineers 1999: Committee Construction Safety Technology, Ministry of Labor, R.O.K 1999: Committee Design & Planning, Ministry of Defence Rook 2002: Committee Fire Prevention Design Ministry of Internal Affairs, R.O.K CURRENT APPOINTMENTS IN THE UNIVERSITY: 2004: Associate Professor PREVIOUS APPOINTMENTS: Teaching 1998 - 2004: 1997: Promoted to Professor 1988 - 1998: Teaching into Construction Work Safety and Engineering 1983 - 1988: General Engineer for Supervising Construction FED Engineers, US Army Corps of Engineers, U.S.A 1976 – 1978: Site Engineer for 2 TEACHING 2.1 CURRENT UNDERGRADUATE AND POST GRADUATE TEACHING
All above-mentioned courses included in the student evaluation of courses received favourable reviews 2.2 PREVIOUS UNDERGRADUATE AND POST GRADUATE TEACHING
2.3 RESEARCH SUPERVISION Currently supervising 11 postgraduate students 3 ADMINISTRATION 3.1 CURRENT ADMINISTRATIVE ACTIVITIES Departmental · Member of the Research Committee (since 1998) · Member of the Public Information · Member of the Environmental Matters 4 RESEARCH 4.1 RESEARCH AREAS · Fibre Reinforced Plastic (FRP) reinforcement for concrete structures · Computer Expert System for Construction Supervisor 4.2 PUBLICATIONS 144 publications in refereed journals and conferences, and 37 other publications.. 4 papers submitted in journals. 4.3 HIGHER DEGREE SUPERVISION - EXAMINATION Internal examiner for 11 MSC examinations 4.4 EUROPEAN AND INTERNATIONAL LINKS 4.4.1 Visits To Overseas Research Centres · Civil Engineering Department of · Civil Engineering Department of · Civil Engineering Department of · Civil Engineering Department of · Civil Engineering Department of Swiss Federal Institute of Technology, Prof Eugen Bruwhiler 5 PROFESSIONAL ACTIVITIES 5.1 Paper referee · Journal of Korea Institute of Fire Science & Engineering · Journal of Korea Institute of Industrial Saf 5.2 Chairing Seminars, Conferences · One session of the APSS Seminar, 5.3 ATTENDANCE OF CONFERENCES where PAPERS WERE DELIVERED · Asian Pacific Safety Seminar, APSS, · One Session of the APSS Seminar, · 6th 5.3.1 Invited Seminar/Presentations · 5.4 PATENTS - DESIGNS · A new British patent application No 0130852.7 was filed on · A new · A new Korean patent application No 0215394 was filed on 20/12/2000 entitled “Handrail with safe grab against Emergency Situation” · A new Korean patent application No 0312677 was filed on 11/10/2001 entitled “Semi Purification System of Underground Water in Construction Work” 6 PUBLICATIONS 6.1 BOOKS in Print 1) Yi Hyung LEE, Song LEE and Ki Sang SON, “Construction Safety Engineering”, Ki Moon Dang Publication, revised in 2001 2) Ki Sang SON, “Structural Analysis for Construction Safety”, Ki Moon Dang, 1995. 3) Ki Sang SON, “Construction Safety Design Process”, Ki Moon Dang, 1996 4) Ki Sang SON, “Construction Work Safety Analysis”, Ki Moon Dang, 1994 6.2 REFEREED JOURNALS AND CONFERENCE PROCEEDINGS 1) Ki Sang SON, “Plastic Design of Steel Structure Subject to Seismic Load”, , Spring Conference, April, 1982 2) Ki Sang SON, “Experimental Study on the Elasto Plastic Behaviour of RC Frame, , Autumn Conference, October, 1987, Korea Institute of Architectural Engineering 3) Ki Sang SON, “Check Model for Human Error in Structural Design”, Autumn Conference, November, 1992, Korea Institute of Industrial Safety 4) Ki Sang SON and a co-author, “Experimental Study on the Low-cost Repair for RC Structure”, Autumn Conference, November, 2000, Korea Institute of Industrial Safety 5) Ki Sang SON, “Experiment Study on the Concrete Section of Column with hole”, Autumn Conference, November, 2000, Korea Institute of Industrial Safety 6) Ki Sang SON and a co-author, “Economic Investigation for Safe work of Apartment Construction Process”, Autumn Conference, November, 2000, Korea Institute of Industrial Safety 7) Ki Sang SON and a co-author, “Anti-Noise-Material use against Noise Source in Construction”, Autumn Conference, November, 2000, Korea Institute of Industrial Safety 8) Ki Sang SON and a co-author, “Pointing out Problems with Safety Training in Construction”, Autumn Conference, November, 2000, Korea Institute of Industrial Safety 9) Ki Sang SON and a co-author, “Electrical Characteristic of the Concrete mixed with Recycled Waste-type”, Spring Conference, May, 2001, Korea Institute of Industrial Safety 10) Ki Sang SON and a co-author, “Vibration Decrease with Low-cost in Ready made concrete Piling”, Spring Conference, May, 2001, Korea Institute of Industrial Safety 11) Ki Sang SON and a co-author, “Column Strength Change with Hole”, Spring Conference, May, 2001, Korea Institute of Industrial Safety 12) Ki Sang SON and a co-author, “Comparison between the Estimated Amount and Actually Selected Amount of Work”, Spring Conference, May, 2001, Korea Institute of Industrial Safety 13) Ki Sang SON, “Strength Characteristic of the waste-tyre mixed Concrete Spring Conference”, May, 2001, Korea Institute of Industrial Safety 14) Ki Sang SON and a co-author, “Efficient Safety Training Technique in Construction”, Spring Conference, May, 2001, Korea Institute of Industrial Safety 15) Ki Sang SON and a co-author, “Safe Reorganization under Night Illumination in Construction Site”, Spring Conference, May, 2001, Korea Institute of Industrial Safety 16) Ki Sang SON and two co-authors, “Electrical Characteristic of the waste-tyre mixed Concrete long term Exposure”, Spring Conference, May, 2001, Korea Institute of Industrial Safety 17) Ki Sang SON and two co-authors, “Electrical Characteristic of the waste-tyre Mixed Concrete”, Autumn Conference, November, 2001, Korea Institute of Industrial Safety 18) Ki Sang SON and a co-author, “Electrical Characteristic for Rebar Embedded in Concrete”, Autumn Conference, November, 2001, Korea Institute of Industrial Safety 19) Ki Sang SON and a co-author, “Electrical Characteristic of Carbon-mixed Concrete”, Autumn Conference, November, 2001, Korea Institute of Industrial Safety 20) Ki Sang SON and a co-author, “Electrical Characteristic of Steel Dust-mixed Concrete”, Autumn Conference, November, 2001, Korea Institute of Industrial Safety 21) Ki Sang SON and a co-author, “Electrical Characteristic of Drink Can-mixed Concrete”, Autumn Conference, November, 2001, Korea Institute of Industrial Safety 22) Ki Sang SON and a co-author, “Safety Problem Varying with Reconstructed Apartment Size”, Autumn Conference, November, 2001, Korea Institute of Industrial Safety 23) Ki Sang SON and a co-author, “Analysis of Cracking Problems in RC Structure Building”, Autumn Conference, November, 2001, Korea Institute of Industrial Safety 24) Ki Sang SON and two co-authors, “Heat Characteristic of Round Saw Work in Construction Site”, Autumn Conference, November, 2001, Korea Institute of Industrial Safety 25) Ki Sang SON, “Interior Illumination Problem in 26) Ki Sang SON and a co-author, “Reorganization 27) Problem of Construction Safety Sign”, Autumn Conference, November, 2001, Korea Institute of Industrial Safety 28) Ki Sang SON and a co-author, “Strength Characteristic of Drink can-mixed Concrete”, Autumn Conference, November, 2001, Korea Institute of Industrial Safety 29) Ki Sang SON and two co-authors, “Characteristic of waste tyre-mixed Concrete against Fire”, Autumn Conference, November, 2001, 30) Ki Sang SON and a co-author, “ Modelling Safety Management System in Construction Work”, Autumn Conference, November, 2001, APSS, Vol 1 31) Ki Sang SON and a co-author, “Strength Change Varying with Enclosed Method Using Economic Material”, Autumn Conference, November 2001, APSS, Vol 2. 32) Ki Sang SON and two co-authors, “Characteristic of Drink can-mixed Concrete Varying with Temperature”, Spring Conference, May 2002, 33) Ki Sang SON and a co-author, “Electrical Characteristic of Carbon-mixed Concrete long term exposure”, Spring Conference, May 2002, Korea Institute of Industrial Safety 34) Ki Sang SON and a co-author, “Electrical Characteristic of Steel Dust-mixed Concrete with long term Exposure”, Spring Conference, May 2002, Korea Institute of Industrial Safety 35) Ki Sang SON and a co-author, “Analysis of Correlation ship between Sunshine Rate and Falling Accident”, Spring Conference, May 2002, Korea Institute of Industrial Safety 36) Ki Sang SON and a co-author, “Study Solution for Worker in Construction”, Spring Conference, May 2002, Korea Institute of Industrial Safety 37) Ki Sang SON and a co-author, “Analysis of Correlation ship between colour on the warring sign and Accident in Construction Site”, Spring Conference, May 2002 November, 1992, Korea Institute of Industrial Safety 38) Ki Sang SON and a co-author, “Risk Assessment of Construction Work Using OHSAS 18001 System” ,Spring Conference, May 2002, Korea Institute of Industrial Safety 39) Ki Sang SON and a co-author, “Risk Analysis Using KOSHA 2000”, Spring Conference, May 2002, Korea Institute of Industrial Safety 40) Ki Sang SON and a co-author, “Application Method Using Fault Tree Analysis for Construction Work”, Spring Conference, May 2002, Korea Institute of Industrial Safety 41) Ki Sang SON and a co-author, “Economic Noise Decrease in the Building Construction Area”, Spring Conference, May 2002, Korea Institute of Industrial Safety 42) Ki Sang SON and a co-author, “Safety Ensuring Technique in Road Construction”, Spring Conference, May 2002, Korea Institute of Industrial Safety 43) Ki Sang SON and two co-authors, “Problem in Establishing OHSAS 18001 for Small work Place with less than 50 Workers”, Spring Conference, May 2002, Korea Institute of Industrial Safety 44) Ki Sang SON and a co-author, “Problem in Application OHSAS 18001 In Road Construction”, Spring Conference, May 2002, Korea Institute of Industrial Safety 45) Ki Sang SON and a co-author, “Fire Characteristic of Carbon-mixed Varying with Temperature”, Spring Conference, May 2002, Korea Institute of Industrial Safety 46) Ki Sang SON and a co-author, “ Fire Characteristic of steel Dust Varying with Temperature”, Spring Conference, May 2002, Korea Institute of Industrial Safety 47) Ki Sang SON and a co-author, “Strength Change due to Temperature of Crashed Drink Bottle Mixing Concrete”, Autumn Conference, November, 2002, 48) Ki Sang SON and a co-author, “Strength Characteristic of Drink can-mixed Concrete”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety 49) Ki Sang SON and a co-author, “Problem and Solution for Female Workers in Construction Field ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety 50) Ki Sang SON and a co-author, “Strength Characteristic of Drink Bottle Particle ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety 51) Ki Sang SON and a co-author, “Safety Effect due to Material Procurement Method varying with Apartment Building Scale ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety 52) Ki Sang SON and a co-author, “Factor by Factor Analysis of Man-made Accident ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety 53) Ki Sang SON and a co-author, “Operation Problem and its Safety of the Bridge Construction Equipment ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety 54) Ki Sang SON and a co-author, “Forecasting Analysis for the Level of Accident Occurrence in the Road Construction”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety 55) Ki Sang SON and a co-author, “Test on the in Apartment Building ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety 56) Ki Sang SON and a co-author, “Effective Maintenance Method for School Safety ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety 57) Ki Sang SON and a co-author, “Electrical Characteristic of Long-term Exposed Concrete Mixed with Drink Can Particle ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety 58) Ki Sang SON and a co-author, “Problem Accident Inducement due to Stress of Construction workers ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety 59) Ki Sang SON and a co-author, “Characteristic of the Concrete Strength Mixed with P.P Band Fibre ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety 60) Ki Sang SON and a co-author, “Construction Safety Effect due to Environmental Contamination ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety 61) Ki Sang SON and a co-author, “Relation Between Accident and Competent Material Procurement Method in Construction Field ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety 62) Ki Sang SON and a co-author, “Passenger-Accident Prevention during Express Railway Operation in 63) Ki Sang SON and a co-author, “Investigation on the Accident Cause due to Look but don’t See on the Road ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety 64) Ki Sang SON and a co-author, “Safety Sign Application for Accident Prevention in Construction Site Varying with its Colour ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety 65) Ki Sang SON and a co-author, “Safety Effect of School Building and Perimeter Facilities ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety 66) Ki Sang SON and four co-author, “Inspect Analysis of Each man-made Accident Factor at Atomic Energy power plant”, Autumn Conference, 28 March, 2003, Spring conference Korea Institute of Risk Managenent 67) Ki Sang SON and two co-author, “Non-ground Electrical Circuit for Movable Low volt Generator at Construction Site”:, 16 May 2003, Spring Conference Korea Institute of Industrial Safety 68) Ki Sang SON and a co-author, “ Social Cost on the Accident Occurrence at Office Building Construction”, 16 May 2003, Spring Conference Korea Institute of Industrial Safety 69) Ki Sang SON and a co-author, “ Social Cost on the Accident at Apartment Building Construction ”, 16 May 2003, Spring Conference Korea Institute of Industrial Safety 70) Ki Sang SON and a co-author, “ Social Cost on the Accident Occurrence at Office Building Construction”, 16 May 2003, Spring Conference Korea Institute of Industrial Safety 71) Ki Sang SON and a co-author, “ Correlation between Accident Occurrence and Workshop Frequency at Steelwork ”, 16 May 2003, Spring Conference Korea Institute of Industrial Safety 72) Ki Sang SON and a co-author, “ Impact to the prevention of worker’s audient by Safety Training for Lift Operation ”, 16 May 2003, Spring Conference Korea Institute of Industrial Safety 73) Ki Sang SON and a co-author, “ Support Condition Safety of the Lowest Level of Bridge Slab Form ”, 16 May 2003, Spring Conference Korea Institute of Industrial Safety 74) Ki Sang SON and a co-author, “An Efficiency on Safety Traing for Round Open well Caisson of Bridgework ”, 16 May 2003, Spring Conference Korea Institute of Industrial Safety 75) Ki Sang SON and a co-author, “ Safety of Double deck Bridge Work ”, 16 May 2003, Spring Conference Korea Institute of Industrial Safety 76) Ki Sang SON and a co-author, “Accidents under the Finishing work of Department Store ”, 16 May 2003, Spring Conference Korea Institute of Industrial Safety 77) Ki Sang SON and two co-author, “ Vibration cut Mechanism of Excavation Terench Cut ”, 16 May 2003, Spring Conference Korea Institute of Industrial Safety 78) Ki Sang SON and two co-author, “Risk Analysis on the Remaining Life of the Existing Building”, 23 May 2003, Safety Management Science 79) Ki Sang SON and a co-author, “Maintence Cost Reasonability of the Existing Bridge ”, 23 May 2003, Safety Management Science 80) Ki Sang SON and a co-author, “Establishment of Safety Intensity decides by field safety Manager ”, 23 May 2003, Safety Management Science 81) Ki Sang SON and a co-author, “Look but Don’t See of Non-Professional Driver”, 23 May 2003, Safety Management Science 82) Ki Sang SON and a co-author, “Carpenter’s Human Error at Construction Site”, 23 May 2003, Safety Management Science 83) Ki Sang SON and a co-author, “Safety of Low Volt Generator –Portable at a Construction Site”, 31 October 2003, Korea Institute of Industrial Spring Session 84) Ki Sang SON and a co-author, “Fine Recognition at a Construction Site”, 31 October 2003, Korea Institute of Industrial Spring Session 85) Ki Sang SON and a co-author, “Potential Hazard during Night Work at a Construction Site”, 31 October 2003, Korea Institute of Industrial Spring Session 86) Ki Sang SON and won mo KAL, “Investigation on the Human Error of Carpenter at Construction Site”, Asia-pacitic Symposium on Safety(APSS) in 87) Ki Sang SON and won mo KAL, “Investigation on the Accident due to Construction Worker’s Stress”, Asia-pacitic Symposium on Safety(APSS) in 88) Ki Sang SON and Jae Nam CHOI and won mo KAL ,“Impact of Environmental Problem in Construction Site”, Asia-pacitic Symposium on Safety(APSS) in 89) Ki Sang SON and Jung Bong PARK and Young Kyun YANG, “Formulation for Cutting Earth Vibration using Trench Cut in Construction Site”, Asia-pacitic Symposium on Safety(APSS) in Taipei, 18-20, November 2003 90) Ki Sang SON and Sang Ha BAE and Yoon Hang CHO, “Settlement of the Bearing Steel Plate with Pipe Support for Road Construction”, Asia-pacitic Symposium on Safety(APSS) in 91) Ki Sang SON and Hak Soo YANG, “Investigation on Safety Security Techniques by Type of an Expressway Construction Disater”, Asia-pacitic Symposium on Safety(APSS) in 92) Ki Sang SON and Won Kyun LEE, “Investigation on the accident for finishing work at Departmentstore”, Asia-pacitic Symposium on Safety(APSS) in 93) Ki Sang SON and Kyung Tae PARk, “An Effect on the Work Process due to Death Accident with Relation to the Construction of Apartment Building”, Asia-pacitic Symposium on Safety(APSS) in Taipei, 18-20, November 2003 94) Ki Sang SON and Yong Ho CHOI, “An Efficiency of Safety Training for Lift Operation Safety against Accident”, Asia-pacitic Symposium on Safety(APSS) in 95) Ki Sang SON and Soo Kyung Lee, “Temperature Effect of Concrete Strength Properties Mixing with Waste Aluminum Drink Can”, 18 March 2004, 6th Asia Oceanian Symposium on Fire Science and 96) Ki Sang SON and another, “Basic Study on Improving KOSHA18001”, 30th April 2004, 97) Ki Sang SON and another, “Noise reducing idea against a large breaker at Work for urban Apartment Building”, 30th April 2004, Korea Society of Safety Spring Session 98) Ki Sang SON and another, “Investigation on Hazards for Temporary work”, 30th April 2004, Korea Society of Safety Spring Session 99) Ki Sang SON and other two authors, “Effect varying with Waste-tire mixing ratio by each Concrete mixed with Saw dust”, 30th April 2004, 100) Ki Sang SON and other two authors, “Experimental Study of Strength Characteristic of light weight Concrete mixed with Saw dust”, 30th April 2004, 101) Ki Sang SON and other two authors, “Characteristic of Concrete Structure mixed with granular Fiber Particle”, 21th Oct 2004, Korea Society of Safety Autumn Session 102) Ki Sang SON and other two authors, “Strength Characteristic of Waste tire-mixing Concrete”, 21th Oct 2004, Korea Society of Safety Autumn Session 103) Ki Sang SON and another, “ Foreign workers Safety at Construction site”, 21th Oct 2004, Korea Society of Safety Autumn Session 104) Ki Sang SON and other two authors, “Strength valuation of existing building using Core-sampled mold”, 21th Oct 2004, Korea Society of Safety Autumn Session 105) Ki Sang SON , “Correlation between Accident occurring rate and contract price in proportion to Estimated cost”, 25-28th Oct 2004, International Symposium on Safety Science and Technology, 106) Ki Sang SON and other six authors, “Establishing warning System for the Occurrence of industrial Safety”, 29th April 2005, Korea Society of Safety Spring session 107) Ki Sang SON and another, “Safety management of Construction subcontractors using quantified index”, 29th April 2005, Korea Society of Safety Spring session 108) Ki Sang SON and other five authors, “Reestablishment of qualification System for industrial Safety engineer”, 29th April 2005, Korea Society of Safety Spring session 109) Ki Sang SON and another, “Comparison of Flexural Strength mixed with coarse waste tire Particle”, 29th April 2005, Korea Society of Safety Spring session 110) Ki Sang SON and other two authors, “Structural Strength of Saw dust-mixing Concrete”, 29th April 2005, Korea Society of Safety Spring session 111) Ki Sang SON and another, “Experimental Study on Compressive Strain of Concrete Column with hole”, 29th April 2005, Korea Society of Safety Spring session 112) Ki Sang SON and other two authors, “Insulation Characteristic of Saw dust-mixing Concrete”, 29th April 2005, Korea Society of Safety Spring session 113) Ki Sang SON and another, “Structural behaviour of Sawdust-mixing Concrete with hole”, 29th April 2005, Korea Society of Safety Spring session 114) Ki Sang SON and other three authors, “Effect of organic Solvent coming from Painting work in enclosed Space”, 29th April 2005, Korea Society of Safety Spring session 115) Ki Sang SON and other two authors, “Experimental study on Capacity loss of Column varying with hole Configuration”, 29th April 2005, Korea Society of Safety Spring session 116) Ki Sang SON and other three authors, “Hazard evaluation for the Construction work by worker on experience”, 29th April 2005, Korea Society of Safety Spring session 117) Ki Sang SON other two authors, “Accident-occurring frequency of Construction workers with arthritis”, 29th April 2005, Korea Society of Safety Spring session 118) Ki Sang SON and another, “Application problem of Safety Management costs based on Question & Answer”, 21th May 2005, Korea Institute for Safety Management and Science Spring session 119) Ki Sang SON and other four authors, “Evaluation of hazard in harmful work”, 21th May 2005, Korea Institute for Safety Management and Science Spring session 120) Ki Sang SON and other four authors, “Evaluation of hazardous work task in Industry”, 21th May 2005, Korea Institute for Safety Management and Science Spring session 121) Ki Sang SON and other five authors, “Reasonability of measuring hazardous of Construction Safety manager”, 21th May 2005, Korea Institute for Safety Management and Science Spring session 122) Ki Sang SON and other two authors, “Structural Applicability of Saw dust-mixing Concrete”, 21th May 2005, Korea Institute for Safety Management and Science Spring session 123) Ki Sang SON and other two authors, “Characteristic of fore temperature of Saw dust-mixing Concrete”, 27th May 2005, Korea Institute for Fire Safety and Technology Spring session 124) Ki Sang SON and other 5 another, “Effectiveness of safety cost-calculating rate vary with work size in civil field”, 6th Oct 2005 Korea Society of Safety Autumn Session 125) Ki Sang SON and Yong Chan NA, “A study on scaffolding with low costs at construction field”, 6th Oct 2005 Korea Society of Safety Autumn Session 126) Ki Sang SON and Yoo Taek Kim, “Correlation between national and private accident statistics of construction industry”, 6th Oct 2005 Korea Society of Safety Autumn Session 127) Ki Sang SON and Eu Sik KIM, “Safety check status in domestic construction field”, 6th Oct 2005 Korea Society of Safety Autumn Session 128) Ki Sang SON and Chang Heon CHUN, “Analysis glass web and steel flange-composing beam”, 6th Oct 2005 Korea Society of Safety Autumn Session 129) Ki Sang SON and Eun Sok Lim and Min Lae NO, “A base on of subway maintenance accident predict the accident possibility after long time”, 6th Oct 2005 Korea Society of Safety Autumn Session 130) Ki Sang SON and Yong Ho CHIO and Hak Soo YANG, “Accident of foreign workers at construction sites”, 6th Oct 2005 International Symposium on Safety Engineering-2nd 131) Ki Sang SON and Mi Jin KANG and Yong Soon LEE and Jung Woo LEE, “Organic solvent due to painting work in enclosed space”, 2th Nov 132) Ki Sang SON and Byung Heon CHO, “Risk evaluation for construction work with a stand point of labor”, 2th Nov 133) Ki Sang SON and 134) Ki Sang SON and Tae Yeon KIM and 135) Ki Sang SON and Won Kyun LEE, “Risistant capacity of waste tire mixing concrete beam”, 2th Nov 136) Ki Sang SON and 137) Ki Sang SON and 138) Ki Sang SON and Hak Soo YANG, “Analysis of foreign worker control effectiveness”, 2th Nov 139) Ki Sang SON and Jae Nam CHOI, “Insulation behavior of saw dust concrete”, 2th Nov 140) Ki Sang SON Chang Hyun CHUN, “Capacity loss of RC concrete column with holes”, 2th Nov 141) Ki Sang SON and Yong Ho CHOI, “Experimental study on the property change by strength of concrete mixed with waste tyre chips”, 2th Nov 142) Ki Sang SON and Byung Heon CHO, “Structural property of sawdust concrete”, 2th Nov 143) Ki Sang SON and Hak Soo KANG, “Risk analysis of civil work using AHP technique”, 2th Nov 144) Ki Sang SON, “ Quantification for the Analysis of Construction Safety Level”, Korea Institute of Industrial Safety, Vol. 7, No.3, September 1992 145) Ki Sang SON, “ Safe Resistant Capacity of Trapezoidal Web Steel Beam with Opening”, Korea Institute of Industrial Safety, Vol. 7, No.4, December 1992 146) Ki Sang SON, “ Computer Programming for the Analysis of Form Structure System”, Korea Institute of Industrial Safety, Vol. 8, No.1, March 1993 147) Ki Sang SON, “ Static Structure Analysis of Scaffolding System for Temporary Work”, Korea Institute of Industrial Safety, Vol. 8, No.2, June 1993 148) Ki Sang SON, “ Human Error Check in Structural Design”, Korea Institute of Industrial Safety, Vol. 8, No.3, December 1992 149) Ki Sang SON, “ Quantification for the Analysis of Building Collapsion”, Korea Institute of Industrial Safety, Vol. 9, No., March 1994 150) Ki Sang SON, “ Computer Simulation to Check Environmental Contamination Limit”, Korea Institute of Industrial Safety, Vol. 11, No.3, September 1995 151) Ki Sang SON, “ Quantification for the Analysis of Construction Safety Level in Underground Construction Work Using TOPDOWN Technique”, Korea Institute of Industrial Safety, Vol. 1, No.3, September 1995 152) Ki Sang SON and two co-authors, “ Shear Capacity of the Steel Beam Web with Opening”, Korea Institute of Industrial Safety, Vol. 11, No.1, October 1995 153) Ki Sang SON a co-author, “ Establishing Standard Concerning Bracket’s to Support Scaffold”, 154) Ki Sang SON a co-author, “ Shear Capacity of Folding Web Steel Beam”, Korea Institute of Architectural Engineering, Vol. 16, No.3, March 1996 155) Ki Sang SON and two co-authors, “ Analysis of Safety Control Effectiveness in Construction”, 156) Ki Sang SON and two co-authors, “ Eccentric Behaviour of Steel Structure due to Seismic Load”, 11th World Conference for Earthquake Engineering, 157) Ki Sang SON, “ Effectiveness of Safety Net in Construction Site”, Korea Institute of Architectural Engineering, Vol. 14, No.9, September 1998 158) Ki Sang SON, “ An Experimental Study on the Durability of Galvanized Steel Pipe Support Depending On Used Period”, Korea Institute of Architectural Engineering, Vol. 14, No.9, November 1998 159) Ki Sang SON, “ Estimation Technique on Safety Skill of Steel Structure Plant Based on Accident Rate”, Korea Institute of Industrial Safety, Vol. 14, No.13, December 1998 160) Ki Sang SON, “ Quantifying Practical Application for Specialized Course on Temporary Work Safety”, Korea Institute of Industrial Safety, Vol. 15, No.1, March 1999 161) Ki Sang SON, “ Safety Accident of Stairway for cased on Stairway Design”, 162) Ki Sang SON and two co-authors, “ Practical Study on the Safety Management Technique”, 163) Ki Sang SON and two co-authors, “ Improving Self-Safety Control Capacity of Construction Safety”, Korea Institute of Industrial Safety, Vol. 15, No.4, December 2000 164) Ki Sang SON and two co-authors, “ Preliminary Safety-Ensuring Method for Construction Safety”, 165) Ki Sang SON and two co-authors, “ An Experimental Study on the Correlation ship between Hise-rised Safety guard and Worker’s Safety”, Korea Institute of Safety Management, Vol. 16, No 2, June 2001 166) Ki Sang SON, “ Experimental Study on the Behaviour of Paulo Circular Concrete Column”, Korea Institute of Industrial Safety, Vol. 16, No.3, September 2001 167) Ki Sang SON, “ Concrete Reinforcement Using P.P Band”, Korea Institute of Industrial Safety”, Vol. 6, No.5, December 2001 168) Ki Sang SON and a co-author, “ Ensuring Safety Level with and Efficient Model in Construction Management System, Vol. 6, No.5, December 2001 169) Ki Sang SON, “ The Relationship between Leisure Functioning and Community Leisure Program Participants of the Housewives of Dance sports Participants in Seoul”, Korea Alliance for Health, Physical Education, Vol. 40, No 4, December 2001 170) Ki Sang SON and a co-author, “ Effectiveness Check of Gang form Work Using Fault-Tree Analysis”, Korea Institute of Industrial Safety, Vol. 17, No.1, March 2002 171) Ki Sang SON and tow co-authors, “ A Study of Comparative Evaluation for Hise Rise Building Fire Risk by the use of FREM”, Korea Institute of Fire Science & Engineering, Vol. 16, No.1, April 2002 172) Ki Sang SON, “ A Strength Change of the Concrete Mixed with Waste tyre due to Fire”, Korea Institute of Industrial Fire Science & Engineering, Vol. 16, No.1, April 2002 173) Ki Sang SON and a co-author, “ An Analysis of Safety Control Effectiveness”, RE & SS, Vol. 68, June 2000 174) Ki Sang SON, “ Reducing Noise Problem of Excavation Work in Urban Area”, Vol. 17, No. 3, Korea Institute of Industrial Safety, Sept 30, 2002 175) Ki Sang SON, “ Strength Change of Concrete Mixed with Waste tire Particle”, Vol. 19, No. 1, Korea Institute of Industrial Safety, March 31, 2003 176) Ki Sang SON and Tae Mo SHIN and Yon Seok JUNG and Young Soon Lee and Chang Jin Lee, “ Analysis of Factors Related to man-Induced Hazard for Nuclear Facilities”, pp 135-172, Vol. 14, No. 2, Korea Institute of Risk Management, 2003 177) Ki Sang SON and Ali A.Notazar and K.Pilakiutas, “ R.C Calumn Strengthening by Lateral Pre-tensioning of FRP”, pp 491-497, Vol. 17, No. 6&7, Construction & Building Material(SCI), August , 2003 178) Ki Sang SON and another, “Establishing reasonable lighting Criteria for Safe night work”, Journal of Korea Society of Safety, Vol 19. No 3, Sept 2004, 179) Ki Sang SON and another, “Case study of KOSHA18001 for Construction Industry”, Journal of Korea Society of Safety, Vol 19. No 4, Dec 2004 180) Ki Sang SON and another, “Analysis of accident hazard in arranging Foreign workers at Construction site”, Journal of Korea Society of Safety, Vol 20. No 1, Dec 2005 181) Ki Sang SON and another, “Strength Characteristic of the Concrete mixed with Waste tire Particle”, Journal of Korea Society of Safety, Vol 21. No 2, Dec 2005 182) Ki Sang SON and another, "Analysis of accident hazard in arranging Foreign workers at Construction site", Journal of Korea Society of Safety, Vol 20. No 1, Mar 2005 183) Ki Sang SON, "Strength Characteristic of the Concrete mixed with Waste tire Particle", Journal of Korea Society of Safety, Vol 20. No 2, June 2005 184) Seung Ryal HONG and Byung Heon CHO and Ki Sang SON", "Insulation Characteristic of Waste Sawdust-mixing Concrete", Journal of Korea Society of Safety, Vol 20. No 2, June 2005 185) Jae Nam CHOI and Ki Sang SON, "An Adiabatic Characteristic on the Waste tyre Powder-containing mortar", Journal of Korea Society of Safety, Vol 20. No 2, June 2005 186) Seung Ryall HONG and Ki Sang SON, "Structural behaviour of Sawdust-mixing Concrete", Journal of Korea Society of Safety, Vol 20. No 3, Sept 2005 187) Joung Woo LEE and Ki Sang SON, "Measurement of organic Solvent from painting work inside the steel box", Journal of Korea Society of Safety, Vol 20. No 3, Sept 2005 188) Jae Hyung LEE and Ki Sang SON, "Temperature Strength of Sawdust-mixing Concrete", Journal of Korea Society of Safety, Vol 20. No 4, Dec 2005 189) Won Kyun LEE and Ki Sang SON, "Experimental study on the Capacity of Holed RC beam mixed with Waste tire Particles", Journal of Korea Society of Safety, Vol 20. No 4, Dec 2005 190)
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
ⓒ Copyright 1999~ TECHNOTE-TOP / TECHNOTE.INC,